NTE5679 TRIAC - 600V, 40A
Description The NTE5679 TRIAC may be gate triggered from a blocking to conduction state for either polarity of applied voltage and is designed for AC switching and phase control applications such as speed and temperature modulation controls, lighting controls, and static switching relays. The triggering signal is normally applied between the gate and MT1. Electrical Characteristics: (All measurements are at TA = +25C, 60Hz with a resistive load unless otherwise specified) Repetitive Peak Blocking Voltage (Note 1), VDRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V RMS On-State Current (Conduction Angle of 360, TC = 0 to +125C), IT(RMS) . . . . . . . . . . . . 40A Peak Off-State Current (VDRM = 600V, Gate Open, Note 1), IDRM TC = +25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mA TC = +125C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA Peak One-Cycle Surge Current, ITSM 50Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335A 60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400A Non-Repetitive RMS Surge On-State Current for Fusing (IGT = 500mA, 8.3ms), I2t . . . . 664A2sec Maximum DC Gate Trigger Current (VD = 12V, Quad I, II, III), IGT . . . . . . . . . . . . . . . . . . . . . . 100mA Maximum DC gate Trigger Voltage (VD = 12V, Quad I, II, III. Note 2), VGT TC = +25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5V TC = +125C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.2V Peak On-State Voltage (IT(RMS) = 40A, TC = +25C, Note 1), VTM . . . . . . . . . . . . . . . . . . . . . . . 1.8V DC Holding Current (gate Open, Note 1, Note 3), IH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120mA Peak Gate Trigger Current (Pulse Width 10s), IGTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4A Peak Gate Power Dissipation (Pulse Width 10s), PGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40W Average Gate Power Dissipation, PG(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800mW Minimum Critical Rate of Rise of Off-State Voltage (VDRM = 600V, Gate Open, Note 1), dv/dt TC = +100C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375V/s TC = +125C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250V/s Minimum Critical Rate of Rise of Commutation Voltage (Note 1), dv/dt(c) (VDRM = 600V, IT(RMS) = 40A, Commutating di/dt = 21.6A/msec, Gate Unenergized) 4V/s Maximum Rate of Change of On-State Current (IGT = 200mA, Rise Time = 0.1s), di/dt . 150A/s Maximum Gate Controlled Turn-On Time (IGT = 500mA, Rise Time = 0.1s), tgt . . . . . . . . . . . . 5s Operating Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +125C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 to +125C Note 1. For either polarity of MT2 with reference to MT1 terminal. Note 2. For either polarity of gate voltage (VGT) with reference to MT1 terminal. Note 3. Initial On-State Current = 400mA (DC).
1.187 (30.16) .757 (19.22)
MT2 MT1 Gate .161 (4.08) .765 (19.43)
.595 (15.12)
1.565 (39.75)
.317 (8.05)
.690 (17.52) .290 (7.36)
.098 (2.48)
All Dimensions are Max
|
